Dc Bus Installation Parts (For Rittal Vx25 Enclosures); Dc Connection Parts 1 Of 2 (For Rittal Vx25 Enclosures) - ABB ACS880-104 Hardware Manual

240 Ordering information

DC bus installation parts (for Rittal VX25 enclosures)

The brackets in this kit act as a mounting base for the busbar supports of the Rittal Flat-PLS
DC bus and ensure its correct placement and alignment inside the cabinet line-up.
Note:
The designs presented in this manual for Rittal VX25 enclosures employ the Rittal Flat-PLS
busbar system. Make sure that the current carrying capability of the busbars is not exceeded
at any point of the drive system.
Used with ...
400/600/800 mm VX25
enclosure

DC connection parts 1 of 2 (for Rittal VX25 enclosures)

These parts connect the Flat-PLS busbars to the DC fuses, and provide the mounting base
for the charging components if required.
Used with...
400/600 mm VX25 enclosure
without DC switch/disconnect-
or and charging
Qty Ordering code
1 kit per cu-
3AXD50000333387
bicle
Qty Ordering code
1 per
mod- 3AXD50000337446
ule
Kit code
A-468-X-001-
VX
3AXD50000333639
Kit code
A-46-8-206-VX
Instruction code:
3AXD50000345915
Illustration
Instruction code:
Illustration