Service Information - Honda V65 Magna-VF1100C 1983 Shop Manual

CLUTCH
SERVICE INFORMATION
GENERAL
• This section covers removal and installation of the clutch hydraulic system, clutch, and starter clutch.
• DOT 4 brake fluid is used for the hydraulic clutch and is referred to as clutch fluid in the section. Do oot use other types
of fluid as they are not compatible.
• Clutch maintenance can be done with the engine in the frame.
SPECIFICATIONS
Clutch master cylinder Cylinder I.D.
Piston O.D.
Clutch slave cylinder Cylinder I.D.
Piston O.D.
Clutch Outer guide I.D.
Spring free height
Spring preload/length
Disc thickness
Plate warpage
Starter clutch
Driven gear O.D.
One way clutch
Clutch center 8 I.D.
Clutch inner O.D.
TORQUE VALUES
Clutch hose oil bolts
Clutch fluid reservoir cover '83:
After '83:
Starter clutch bolt
Clutch center lock nut
Starter clutch cover bolt
Master cylinder holder bolt
TOOLS
Special
Snap ring pliers
Lock nut wrench
Common
Universal holder
Driver
Attachment, 42 x 47 mm
Pilot, 36 mm
7-2
STANDARD
16.870-15.913 mm (0.6248-0.6266 in)
16.827-16.854 mm (0.6231-0.6242 in)
38. 100-38.162 mm ( 1.5000-1.5024 in)
38.036-38.075 mm (1.4975-1.4990 in)
29.995-30.012 mm (1.1809-1.1816 in)
4.6 mm (0. 18 in)
115-135 kg/2 mm (254-298 lb/0.08 in)
3.72-3.88 n1m (0. 147-0.153 in)
-
54.170-54.200 mm (2.1327-2.1339 in)
25-35 N·m (2.5- 3.5 kg-m, 18- 25 ft-lb)
2-3.5 N·m (0.2- 0.35 kg-m, 1.4- 2.5 ft-lb)
1- 2 N·m (0. 1- 0.2 kg-m, 0.7- 1.4 ft-lb)
80-100 N-m (8.0- 10.0 kg-m, 58-72 ft-lb)
63-67 N-m (6.3-6.7 kg-m, 46-48 ft·lb)
26- 30 N·m (2.6-3.0 kg·m, 19-22 ft-lb)
10-14 N·m (1.0-1.4 kg·m, 7-10 ft·lb)
SERVICE LI MIT
16.93 mm (0.627 in)
15.80 mm (0.622 in)
38.18 mm (1.503 in)
38.02 mm (1.497 in)
30.08 mm (1.184 in)
3.6 mm (0.14 in)
-
3.1 mm (0.12 in)
0.30 mm (0.012 in)
54.16 mm (2.132 in)
74.50 mm (2.933 in)
57.70 mm (2.271 in)
07914-3230001 -Equivalent tool commercially available.
079 16-4220000
07725-0030000
07749-0010000
07746-0010300
077 46-0040800