Honda V65 Magna-VF1100C 1983 Shop Manual page 220

DR IVE TRAIN
CASE BEARING AND OIL SEAL
REPLACEMENT
Heat the gear case 80° C ( 176° F). Tap the gear case
with a plastic hammer and remove the ring gear and
pinion bearings.
Always wear gloves when handling the gear
case after it has been heated.
NOTE:
Use bearing remover, 35 mm, 07936-3710400
to remove ring gear case bearing.
Remove the ring gear shaft oil seal.
Drive a new oil seal into the case, using the special
tools shown.
Drive new pinion and ring gear bearings into the
case.
14-10
RING GEAR BEARING
OIL SEAL
PINION BEARING
DRIVER
07749-0010000
..
DRIVER
07749-0010000
ATTACHMENT
07945-3330300
ATTACHMENT, 52
x
55 mm
07746-0010400