Honda V65 Magna-VF1100C 1983 Shop Manual page 343

TURN SIGNAL RELAY INSPECTION
NOTE:
The turn signal light does not come on unless
the turn signal switch is in neutral.
Remove the right frame side cover.
Connect a jumper wire between the blue/black wire
of the turn signal relay and ground.
Turn the ignition switch ON.
The turn signal light should come on.
If the light does not come on, check the source
voltage at the gray wire terminal while grounding
the blue/black wire of the turn signal relay coupler.
If there is no voltage, replace the turn signal relay.
POSITION LIGHT RELAY INSPECTION
Remove the coupler box cover (page 15-3).
Remove the position light relay.
Check for continuity between A and B terminals.
Connect a fully charged 12V battery to the relay
terminals as shown.
The position light relay is normal if there is no
continuity with the battery connected.
SWITCHES
TURN SIGNAL RELAY
TURN SIGNAL RELAY
POSITION LIGHT RELAY
21-15