Honda V65 Magna-VF1100C 1983 Shop Manual page 215

Remove the damper cam spring.
Measure the damper cam spring free length.
SERV ICE LIMIT: 63 mm (2.5 in)
Remove the damper case and 0 -ring from the drive
shaft.
Inspect the 0-ring and replace it if necessary.
Replace the damper case on the drive shaft.
ASSEMBLY
Install the damper cam spring into the damper case.
Drive the oil seal guide and oil seal in with the driver
and attachment.
Assemble the remaining parts in the reverse order
of disassembly.
NOTE:
Replace the 0-ring, oil seal, and stop ring with
new ones when reassembling the dr ive shaft.
DRIVE TRAIN
DAMPER CAM SPRING
FREE LENGTH
DAMPER CASE
0 -RING DRIVE SHAFT
ATTACHMENT, 52 x 55 mm
07746- 0010400
DRIVER
07749- 0010000
14-5