Honda V65 Magna-VF1100C 1983 Shop Manual page 110

Remove the left crankcase rear cover bracket.
Place a container under the slave cylinder, remove
the oil bolt, and disconnect the clutch hose.
NOTE:
Avoid spilling clutch fluid on painted sur·
faces.
Remove the slave cylinder.
Remove the piston from the cylinder.
If the piston removal is hard, place a shop towel
over the piston to cushion t'he piston when it is
expelled, and position the cylinder with the piston
down.
Apply compressed air to the fluid inlet to remove
the piston. Use the air in short spurts.
Remove the spring from the slave cylinder.
Remove the oil and piston seals.
Clean the piston groove with clutch fluid.
Check the piston spring for weakness or damage.
CLUTCH
'83, '84, '85:
SPRING
7-9