Honda V65 Magna-VF1100C 1983 Shop Manual page 191

DRIVE GEAR REMOVAL
Remove the dowel pin and 0-rings.
Place the output gear case in a vise with soft jaws,
being careful not to distort the case.
Place the shaft holder tool on the output driven gear
shaft, wedging it against the vise to lock the shaft.
Unstake the inner bearing race lock nut with a '!rill
or grinder. Be careful that metal particles do not
enter the bearing and that the threads on the shaft
are not damaged.
Remove the inner bearing race lock nut.
Discard the nuts.
TRA NSMISSION
DOWEL PI N
0-RINGS
OUTPUT GEAR CASE
SHAFT HOLDER
07923-6890101
\
LOCK NUT WRENCH,
42/56
mm
07916-MB40000
COUNTERSHAFT
13-5