Honda V65 Magna-VF1100C 1983 Shop Manual page 169

CRANKCASE
Tighten the
upp~r
crankcase bolts to the specified
torque in a crisscross pattern and in
2-3
steps.
TORQUE:
8
mm:
21-25
N·m
(2.1-2.5
kg·m,
15-18
ft-lb)
6
mm:
10-14
N-m
(1.0-1.4 kg-m, 7-10 ft-lb)
Install the gearshift indicator switch.
Install the mainshaft bearing holder and tighten the
screw and bolts.
Install a new output gear case gasket with one of
the same thickness as removed.
NOTE:
Early production engines had gaskets that
were not marked.
The gasket is crushed
0.05
mm when the
output gear case is installed.
Install the output gear case with a new gasket.
Install the bolts and then tighten to the specified
torque.
TORQUES :
8
mm socket bolts:
21-25
N-m
(2.1-2.5
kg-m,
15-18
ft-lb)
11-6
6 mm BOLT
8
mm BOLTS
6
mm BOLT
MAINSHAFT BEARING HOLDEf!
8
mm FLANGE BOLTS
BOLTS