Honda V65 Magna-VF1100C 1983 Shop Manual page 194

TRANSMISSION
Place the countershaft/bearing holder and correct
adjusting shim into the output gear case.
Install the bolts and sealing washers with the cover
bracket.
Tighten the bolts in a crisscross pattern until the
drive gear bearing holder seats against the case.
Then tighten to the specified torque.
TORQUE:
30-34
N·m
(3.0-3.4
kg·m,
22-25
ft·lb)
Place the case into a vise with soft jaws.
Install and tighten a new countershaft nut to the
spec1fied torque.
TORQUE:
70-80
N·m
(7.0-8.0
kg·m ,
51 - 58
ft-lb)
Torque wrench scale reading:
64-73
N·m
(6.4-7.3
kg·m,
46-53
ft·lb)
Stake the lock nut.
13-8
LOCK NUT WRENCH,
42/56
mm
07916-MB40000