Honda V65 Magna-VF1100C 1983 Shop Manual page 157

CAMSHAFT INSTALLATION
NOTE :
Follow this procedure from beginning to
end, even if you are only servicing one
cylinder head.
Check the camshaft marks so that you
install each camshaft in its correct location.
The marks on the camshaft mean :
EX RR (ER): Rear cylinder exhaust
IN R R (I R): Rear cylinder intake
EX F R (EF): Front cylinder exhaust
IN FR (IF): Front cylinder intake
The camshaft sprockets are interchange-
able.
Rear Cylinder Head
Lubricate the cylinder head cam bearing surfaces
with molybdenum disulfide grease.
Turn the crankshaft clockwise until the Tl -3 mark
on the flywheel rotor aligns with the rear crankcase
mating surfaces.
CAUTION:
-------------------------
When turning the crankshaft, make sure the
cam chains don't jam at the cam chain ten-
sioners or at the crankshaft.
CYLINDER HEAD/ VALVE
MARKS
/1
I
10-19