General Inspection - Siemens 7XV5673 Device Manual

10 Failures and LED Indications

10.1 General Inspection

10.1 General Inspection
Visual Inspection
If function failures occur, first check the device visually. Observe the following points when inspecting the de-
vice visually:
• Correct installation of the device as described in chapter 4.2 at the intended location
• Compliance with the ambient conditions specified in chapter 11.2.3 of the technical data
• Correct connection of supply voltage and grounding conductors according to chapter 4.3
• Correct connection of communication lines according to chapter 4.3.2
Function Checks
Additionally, check the following aspects:
• Correct functioning of peripheral devices (for example connected PC)
• Compliance with the system requirements specified in chapter 4.4
• Compliance with the access rights according to chapter 4.5
• Compliance with the commissioning sequence of the device according to chapter 4.7
• Evaluation of the LED failure indications, see chapter 10.3.
188 SICAM I/O Unit, 7XV5673, Device Manual
E50417-H1040-C484-A3, Edition 05.2012