Siemens 7XV5673 Device Manual page 63

NOTE
You can edit the displayed factory settings, activate and use them as active parameter set. The
original factory settings are not overwritten and can be used at anytime.
✧
Activate the modified configuration as described in chapter 6.3.1.3.
6.3.1.2 Open Configuration from File
If you have selected Open configuration from file in the Configure tab, you can open an already existing file
in a folder. Proceed as follows:
Figure 6-14
✧
Click the Browse... button.
The Choose file dialog opens.
Figure 6-15
SICAM I/O Unit, 7XV5673, Device Manual
E50417-H1040-C484-A3, Edition 05.2012
Configure Tab, Open Configuration from File
Choose File
6 Operation
6.3 Configuration of the Device
63