Sicam I/O Mapping Tool Installation - Siemens 7XV5673 Device Manual

4 Getting Started

4.8 SICAM I/O Mapping Tool Installation

4.8 SICAM I/O Mapping Tool Installation
The SICAM I/O Mapping Tool is used for implementing the IEC 61850 GOOSE Subscriber configuration (see
section Configuration Using DIGSI 4). When the configuration has been completed, the thus generated SCD
file can be loaded into the SICAM I/O Mapping Tool, and a binary IEC 61850 parameter set can be created
(proprietary format). The result can then be uploaded via the HTML page.
Perform the following steps for installing the SICAM I/O Mapping Tool:
✧
Insert the supplied CD-ROM in the drive of your PC.
✧
Execute the Setup_SicamIO_7XV5673.msi file on the supplied CD-ROM.
Figure 4-6
✧
Click the Next button.
✧
Select a folder in which the program is to be stored, and specify whether the installation is to be made just
for you or also for other users.
Figure 4-7
34
Setup Wizard
Select Installation Folder
SICAM I/O Unit, 7XV5673, Device Manual
E50417-H1040-C484-A3, Edition 05.2012