8.3
I/O Mirror
NOTE
The operational indications output by the SICAM I/O Unit are described in detail in chapter 12.
8.3.1
Ethernet Communication
8.3.1.1 I/O Mirror Client
Prerequisite
Under serial communication, no I/O mirror mode must be parameterized.
Parameterization
The following parameters can be parameterized for Ethernet communication for the I/O mirror client mode, see
also chapter 6.3.3.6:
Table 8-5
Parameter
IP address
Subnet mask
Default gateway
Operating mode
Server IP address
Server port
Response timeout
SICAM I/O Unit, 7XV5673, Device Manual
E50417-H1040-C484-A3, Edition 05.2012
I/O Mirror Client Settings at Ethernet Communication
192.168.0.55
255.255.255.0
192.168.0.1
I/O mirror client
192.168.0.56
51000
3 * 10 ms
Default Settings
8 Communication
8.3 I/O Mirror
Settings
Any
Any
Any
-
Any
10000 to 65535
0 ms = invalid
10 ms to 60 000 ms
157