Safety Information; General Information; Laws And Directives - Siemens SIMATIC ET 200iSP Installation Manual

Safety information

2.1

General information

This wall-mounted enclosure left the factory in perfect condition with regard to safety. To
maintain this condition and to ensure safe operation of the wall-mounted enclosure, read the
notes and warning notices specified in these instructions.
2.2

Laws and directives

Observe the provisions of the test certificate valid for your country.
Electrical connection in hazardous areas
When using in hazardous areas, observe the following:
- The regulations applicable in the country of application for the installation and operation of
devices in hazardous areas.
- In the countries of the European Union, the national implementation of the EU Directive
1999/92/EC.
- In Germany, this is the BetrSichV (Operational Safety Ordinance).
- The provision for the installation of electrical systems in hazardous areas EN 60079-14
(VDE0165) and EN1127-1.
- The EC-type examination certificate.
All work on electrical circuits for systems subject to explosion hazard must be carried out by
qualified personnel.
Distributed I/O device 6DL2804-1xxxx & 6DL2804-2xxxx
Hardware Installation Manual, 11/2023, A5E42025214-AC
WARNING
2
7