Siemens 7XV5673 Device Manual page 71

6.3.3.2 Binary Outputs (Relay Outputs)
Table 6-3
Indication
(can be set individually for all relay outputs)
Source inverted
(can be set individually for all relay outputs)
Operating mode
(can be set individually for all relay outputs)
To change the outputs of a binary output, proceed as follows:
✧
In the navigation window, select the Operational menu, then the Process connections submenu and
click Binary outputs.
The Binary outputs input/output window opens.
Figure 6-23
NOTE
The parameterization of both binary outputs is identical.
SICAM I/O Unit, 7XV5673, Device Manual
E50417-H1040-C484-A3, Edition 05.2012
Binary Output Settings
Parameter
Configure Tab, Binary Outputs Input/Output Window
Default Setting
-none- Acc. to list box
(see chapter 13.1.2)
no no
yes
Persistent Acc. to list box
(see chapter 13.1.2)
6 Operation
6.3 Configuration of the Device
Settings
71