Siemens 7XV5673 Device Manual page 193

Table 10-1
LED
RUN ERROR
H1 H2
RUN ERROR
H1 H2
RUN ERROR
H1 H2
RUN ERROR
H1 H2
ERROR
RUN ERROR
C
H1 H2
C
C
RUN ERROR ERROR
H1 H2
C C
RUN ERROR
H1 H2
C
C
RUN ERROR ERROR
H1 H2
C C
SICAM I/O Unit, 7XV5673, Device Manual
E50417-H1040-C484-A3, Edition 05.2012
Indications Signaled by LEDs (cont.)
Boot loader was started because an error occurred in the process application.
DHCP active (H1 switches off after reception of the IP address via
DHCP)
Boot loader started, process application is being loaded.
Double IP address is detected.
Normal mode:
IP address has been configured or received from DHCP.
DHCP:
LED RUN (green) is lit after the IP address is received by the DHCP server
Default IP address is applied by pressing the IP-Addr. push-button.
Double IP address is detected.
Meaning
Process Application
10 Failures and LED Indications
10.3 Indications Signaled by LEDs
193