Menu Display - Panasonic AG-BS300P Operating Instructions Manual

Menu Display

This unit can display the setting menu on the VIDEO OUT terminal, the SDI OUT1 terminal, and the SDI OUT2 terminal on the rear panel.
Basic structure of the menu
Menu setting is operated with the MENU switch and the SEL switch
(JOG dial button).
Menu is divided into main menu, and submenu and setting items.
Set data is written and saved into the internal memory of this unit.
Basic operation of menu display
1
Press the MENU switch (page 10) on the front panel
for 3 seconds. Setting menu will be displayed on the
VIDEO OUT terminal, the SDI OUT1 terminal, and the
SDI OUT2 terminal.
There are three setting menus, SYSTEM, GENLOCK, and
DOWN CONV.
MAIN MENU
SYSTEM
GENLOCK
DOWN CON
2
To open the submenu, turn the SEL switch aligning
the arrow with SYSTEM, GENLOCK, or DOWN CONV
and then press the SEL switch.
MAIN MENU
SYSTEM
GENLOCK
DOWN CON
3
Items to set will flash when the arrow () is moved to
the item to set by turning the SEL switch, and
pressing the SEL switch. Change the setting of the
item by turning the SEL switch.
To increase the setting value:
Turn the SEL switch clockwise.
To decrease the setting value:
Turn the SEL switch counter-clockwise.
To switch between ON/OFF of the setting value:
Turn the SEL switch clockwise to set ON. Turn the SEL switch
counter-clockwise to set OFF.
GENLOCK
GENLOCK
H PHASE COARSE(HD) :+ 28
H PHASE FINE(HD)
SC PHASE COARSE(SD)
SC PHASE FINE(SD)
H PHASE COARSE(SD) :+ 28
H PHASE FINE(SD)
4
Press the SEL switch.
Flashing of the setting value will stop, and the setting value will
be set.
5
Repeat steps 3 and 4 to continue to change other
settings on the same page.
6
To return to the SYSTEM, the GENLOCK, or the
DOWN CONV screen from the submenu screen,
move the arrow to the menu title by turning the SEL
switch, and press the SEL switch.
GENLOCK
GENLOCK
H PHASE COARSE(HD) :+ 28
H PHASE FINE(HD)
SC PHASE COARSE(SD)
SC PHASE FINE(SD)
H PHASE COARSE(SD) :+ 28
H PHASE FINE(SD)
MAIN MENU
SYSTEM
GENLOCK
DOWN CON
7
Press the MENU switch once the setting is
completed.
It will exit from the menu setting mode, and return to the normal
operation mode.
:EXT
:+ 28
:
:
:+ 28
:EXT
:+ 28
:
:
:+ 28
14