Safety Precautions - Panasonic D-IMager EKL3104 User Manual

1.Safety Precautions

TO PREVENT INJURY TO HUMANS OR DAMAGE TO PROPERTY.
Warning
MISUSE OF THIS PRODUCT MAY RESULT IN DEATH OR SERIOUS INJURY.
Our company is committed to making products of the highest quality and reliability.
Nevertheless, all electrical components are subject to natural deterioration, and durability or
characteristics of a product will depend on the operating environment and conditions of use.
Continued use after such deterioration could lead to overheating, smoke or fire. Always use the
product in conjunction with proper fire-prevention, safety and maintenance measures to avoid
accidents, reduction in product life expectancy or break-down.
Example :
・Safety equipments and devices
・Traffic signals
・Burglar and disaster prevention
・Control or safety device for automotive or train etc.
Head the following precautions to prevent injury or accidents.
1) Do not use this product under any circumstances in which the range of its ratings, environment
conditions or other specifications are exceeded. Such use may generate abnormally high levels
of heat, emit smoke, etc., possibly resulting in damage to circuitry or other accident.
2) Do not use the product if it has been disassembled, remodeled or modified.
This could cause fire or accidents (Electrical shock etc.).
3) Do not insert anything in this products' openings.
4) This product is designed for indoor use. Do not use it in any outdoor environment or in places
where it could be in contact with water.
5) Always connect the sensor unit (USB, AC adaptor) before plugging in the power supply.
6) Always use an AC adaptor as specified on page 7, and ensure it is properly connected.
Incorrect connections may cause malfunctions, generate abnormal high levels of heat, emit smoke,
etc., possibly resulting in fire or causing electric shocks.
7) If smoke or smell should come out from the product, stop the usage immediately. If you continue,
it could cause fire.
MISUSE OF THIS PRODUCT MAY RESULT IN INJURY TO USERS OR
Caution
DAMAGE TO PROPERTY.
1) Make sure to install the product in a place that can support its weight (Mass). Any fall may
cause
accidents resulting in damages to the product or its surroundings. Therefore, for safety
reasons,
use the fall prevention wire or the wiring fixation cramp for installation for safety reasons .
2) Ensure a periodical maintenance.
If the screws get rusted or loose, the product may fall and be damaged.
3) Do not use or store in places where condensation or freezing can occur or near a cooling
or heating system. Do not leave the product exposed to direct sunlight for a prolonged period.
4) Please ensure a proper fixation of the product's wires using the provided items.
Otherwise, it could cause an accident.
THESE WARNINGS MUST BE STRICTLY OBSERVED
3/15