Security License; Target Devices And Catalyst Stores Licenses; Storeonce Optional Hardware Licenses - HPE StoreOnce 3100 Installation And Configuration Manual

factory for capacity expansion, all storage will already be licensed and available for use. If not factory
configured, the license entitlement will be delivered to the user via email and the storage must be
added to the RAID configuration. See the StoreOnce 5100 48 TB Capacity Upgrade Kit Guide for
further information.
Each Capacity Upgrade after installation requires a license that must be loaded.
NOTE:
If capacity expansion has been ordered and pre-configured by the factory with the base system, the
license will already have been applied.

Security license

Security: Security features (Data at Rest Encryption, Data in Flight Encryption, and Secure Erase)
require a Security license.
NOTE:
Data in flight encryption is intended to be used to secure links between data centers for StoreOnce VTL
or NAS Replication or Low Bandwidth Catalyst Copy operations. Using Data In Flight Encryption for direct
backup operations to the StoreOnce appliance over a local network is not supported due to the
performance impact of the encryption.

Target devices and Catalyst stores licenses

• StoreOnce Catalyst:
StoreOnce Catalyst devices require a license for backup and for copy, so licenses must be installed on
both origin and destination HPE StoreOnce Systems.
• Replication:
VTL and NAS replication requires a license on the target system. There is no licensing requirement for
backup to VTL or NAS share devices.

StoreOnce Optional Hardware licenses

StoreOnce Optional Hardware kits contain additional 10 GbE Network or Fibre Channel cards that may
be installed in the PCIe slots on the HPE StoreOnce 5500 System, HPE StoreOnce 3500 Series and the
HPE StoreOnce 5100 System. Each additional FC or 10 GbE card must be licensed. See Optional PCIe
cards on page 76 for more details.
NOTE:
The StoreOnce 3100 does not support optional PCIe cards.
Security license 35