Logging In To The Powerecho - Huawei FusionModule1000A20 Commissioning Manual

FusionModule1000A20 Prefabricated All-in-One
Data Center
Commissioning Guide
Figure 9-8 2288H V5 power button
----End

9.3.3.1.4 Logging In to the PowerEcho

The PowerEcho uses the browser/server (B/S) working mode. You can manage and
maintain the NetEco system server after logging in to the PowerEcho over the
browser on a PC.
Prerequisites
●
●
●
Context
The idle timeout period of the PowerEcho system is 30 minutes by default. Set the
idle timeout period of the PowerEcho system as required. If users do not perform
any operation in the preset idle timeout period after the login, the client is
automatically logged out.
Procedure
Step 1 In the browser address bar, enter https://192.168.8.11:32804, and then press
Enter.
Step 2 Enter the User Name, Password on the login page and click Log In.
Issue 03 (2022-12-15)
The browser version is Internet Explorer 11, Firefox 38ESR, Firefox 60ESR,
Chrome 50 and Chrome 68.
NO TE
To achieve better WebUI viewing effect, you are advised to use Internet Explorer 11
and set the resolution of the PC to 1366*768 or higher.
The IP address of the NetEco server has been obtained.
The PC communicates with the NetEco server properly.
NO TE
192.168.8.11 is the default IP address of the NetEco.
Copyright © Huawei Digital Power Technologies Co., Ltd.
9 Commissioning Core Components
79