Setup Gui - Events - Trigger - Remote Hotkey Sources; Setup Gui - Events - Trigger - Network Trigger Sources; Setup Gui - Events - Trigger - Parameter Sources - junger T*AP Manual

At the bottom of the Trigger table we have two icons :
When you click on one of these icons you may add or delete a line of the above table.
When adding a trigger you may give it a name :
setup GUI – EVENTS – Trigger – Remote Hotkey Sources
Hotkeys are the 8 buttons of an X*AP Remote Panel. You may give them names and enable them
to show up as active on the X*AP Remote Panel :
setup GUI – EVENTS – Triggers – Network Sources
When removing a trigger you may select it
by its name and press <OK>
# the number of the Hotkey on the
X*AP Remote Panel, counting
from left to right.
Label each Hotkey may have a label
that appears in the display of the
X*AP Remote Panel above that
button.
Enable [on / off]
if you turn it off the respective
Hotkey on the X*AP Remote
Panel becomes inactive - no
label is displayed and the button
background light turns off.
50
T*AP