Table of Contents
Advertisement
T*AP
setup GUI – AUDIO PROCESSOR - Overview
The overview shows the actual signal routing of the audio processor blocks, rendered by the DSPs.
This overview depends on the program configuration of the T*AP.
5.1 + 2 program configuration :
4 x 2 program configuration :
The processing blocks in use, which may be activated from their individual setup panes,
will be indicated in green. Blocks shown in grey are not activated by the user. The location of blocks with
dotted lines within the signal path depends on the block setup.
To navigate through the various processing blocks you may either use the mouse over function or the tabs
provides in the navigation bars below the bar graph displays.
33
Advertisement
Table of Contents
