Setup Gui - Audio Processor - Voice Over (5.1 + 2 Program Configuration) - junger T*AP Manual

T*AP
setup GUI – AUDIO PROCESSOR – Voice Over (5.1 + 2 program configuration)
The program signal path for program 1 is 5.1 while the program 2 path is stereo.
The AUX input is used for the voice over signal.
This setup allows you to perform a manually or automatically controlled voice over for a surround and a
stereo program with the same voice signal :
In addition to the parameters for 2Ch voice over the 5.1 circuit has these extra parameters :
Channel
Center Divergence
Attenuated channels
Attenuation (dB)
[C, L/R, L/RC]
selects the channel where the voice over will be mixed to.
[0.00 – C only ... 0.50 – LRC ... 1.0 – LR only]
allows to widen the projection of the voice over signal.
[ALL, Selected]
[-30 ... 0]
45