D*AP LM 4
At the bottom of the Trigger table we have two icons :
When you click on one of these icons you may add or delete a line of the above table.
When adding a trigger you may give it a name :
Web GUI – EVENTS – Trigger – Remote Hotkey Sources
Remote Hotkey Sources – will assign the hotkeys of the LM 4 names and will enable
the respective key(s) :
The example above shows two activated hotkeys #1 "Gain up" and #2 "Gain down". Which will be used
later for other event configuration:
When removing a trigger you may select it
by its name and press <OK>
35