Table of Contents
Advertisement
hardware features
• 1RU Base Unit
• 1RU Remote Panel
• 4x 2 channel audio delay
• Dolby® decoder
• Dolby® encoder
• Dolby® metadata I/O
• 4x AES3id I/O + SRC
• Two interface slots
• RJ45 POE connector
• RJ45 network connector
• USB connector
• 8x GPI
• 8x GPO
• Aux power supply
• External sync IN
• Sync OUT
software features
• 8 channel LevelMagic™
• 5.1 Upmix
• Downmix
• Filter
• Voice Over
• Fail Over
• Delay
• Dynamics
• Monitor
• SNMP agent
• EmBER protocol
operating manual
compact 19" processing device with front side controls and displays
detachable panel with case, powered by POE (Power Over Ethernet)
up to 2sec.delay time each
built in optional Dolby® E or D or D+
built in optional Dolby® E or D or D+ or AAC or HE-AAC
two RS485 9-pin Sub-D connectors
on board AES I/O with relay bypass and SRC (selectable) per input
expansion slots for optional I/O boards : 3-G/HD/SD-SDI, AES, analog
for connecting the X*AP Remote Panel
100BaseT full duplex Ethernet interface
built in USB < > serial adapter to access the service port
balanced inputs on 25pin Sub-D
relay change over contacts on 25pin Sub-D
isolated 5V supply for external GPI/O wiring
BNC input (Word Clock, AES, Black Burst, Tri-Level)
BNC Word Clock output
Junger Audio level, loudness and limiter control algorithm
Junger Audio upmix algorithm
stereo downmix from 5.1 source
HP/LP filter, 5x parametric EQ, SpectralSignature
manual or automatic ducking functions
switching of alternative signals to maintain audio for a specific program
separate delay for each processing channel up to 2000 ms.
compressor / expander
to check paths inside the DSP processor, separate downmix
SNMP v1 get (no set) and configurable traps (see TAP-MIB)
supports the l-s-b Ember and Ember+ protocol for VSM integration,
rd
and 3
party API
Rev. 130906
T*AP
Advertisement
Table of Contents
