Getting Started - X*Ap Remote Panel Menu Page 2/3 - Firmware Display; Getting Started - X*Ap Remote Panel Menu Page 3/3 - Reboot, Factory Default, Test; Operating - Menu Structure Of The X*Ap Remote Panel - junger T*AP Manual

T*AP
getting started – X*AP Remote Panel menu page 2/3
This page shows static information regarding firmware versions and device infos.
getting started – X*AP Remote Panel menu page 3/3
Page 3 allows for reboot, restoring of factory defaults and function test of the X*AP Remote Panel LEDs,
buttons and the rotary knob. Pressing the Device Test button opens up further menus to test the respective
items.

operating - menu structure of the X*AP Remote Panel

Power up display – may show up to 4 Base Units enabled for remote control for this X*AP Remote Panel.
Pressing these buttons connects with the respective Base Unit.
After gathering all Base Unit settings the Main Display opens up :
When pressing the <MENU> button, the main operating menu opens up:
– firmware display
– reboot, restore factory default, device test
13