Table of Contents
Advertisement
V*AP
Setup GUI – EVENTS – Triggers – Sources – Remote Hotkeys
Hotkeys are the 8 buttons of an X*AP RM
to show up as active on the X*AP RM
Setup GUI – EVENTS – Triggers – Sources – Network
Network trigger are based on the EmBER+ protocol from Co. l-s-b
The V*AP receives such trigger over the TCP/IP network. The triggers are issued by a device that has
implemented the EmBER+ protocol (e.g. VSM server). You may assign these triggers to virtual panels
as well as physical (e.g. LBP) buttons of a VSM installation. But also a broadcast automation system
may have an EmBER+ server running that will trigger an event in the V*AP.
#
Label
remote panel. You may give them names and enable them
1
remote panel :
1
#
Label
Enable
Number of the network trigger.
Label of that network trigger. It appears on the
Configuration pane as well as in the EmBER+ tree of the VSM
Studio gadget connector. A 3
use these trigger names as well.
45
The number of the Hotkey on the
X*AP RM
remote panel, counting
1
from left to right.
Each Hotkey may have a label that
appears in the display of the
X*AP RM
remote panel above that
1
button.
[On / Off]
If you turn it off the respective
Hotkey on the X*AP RM
panel becomes inactive - no label is
displayed and the button
background light turns off.
http://www.l-s-b.de/uk
rd
party software implementation will
remote
1
Advertisement
Table of Contents
