Table of Contents
Advertisement
Setup GUI – SYSTEM – Setup
Program Configuration
Program Labels
Program 1
Program 2
Current Sync Source Status
Source
Sample Rate
Show detailed status
Sync Source Information
You will get detailed information about the measured rates of possible sync sources
[2 x 2]
Shows the program configuration (two times two channels).
This is also the default configuration of the audio processing blocks.
Each of the two possible programs has a name that will be used
Label as a reference for the display of parameters and their setup.
You may edit the default names.
shows the status of the 5 tier sync priority circuit
Display of the active sync source.
The measured sample rate.
[ON / OFF]
If you enable that checkbox you will get this information:
14
EASY LOUDNESS
Advertisement
Table of Contents
