Table of Contents
Advertisement
T*AP
This T*AP
Name
Location
Admin / Contact
Graphical User Interface
Device Time
Date
Time
Network
IP Address
Netmask
Gateway
Transmit Metering Data
Enable
UDP Port Range Start
UDP Port Range End
Service Options
Maintenance Interface
via RPC
Telnet Server
Diagnostics
get diagnostics file
input fields for information utilized by higher level services.
give the device a meaningful name that may be used by name services
and SNMP management.
the place where the T*AP is located.
e-mail address of a person in charge.
defines the appearance of the parameter panes regarding preset editor
and on air parameter visibility (see below – for preset concept).
allows you to set the device clock. At the factory it is set to
UTC (Coordinated Universal Time).
if you click into the Date input field,
a comfortable calendar tool will pop up :
if you click into the Time
input field, you will be able to
set the device time
IP address setup, see above:
getting started – IP setup of the Base Unit
metering data will be streamed via UDP protocol. In order to receive such
data by external applications you must define ports (port range) for
matching fire wall definitions.
enables UDP port range use by the device for transferring meter data
from the Base Unit to the PC where the browser resides.
lowest port number.
highest port number.
for in house use to enable communication with factory tools.
enables a telnet server to connect the consol interface via IP (port 21).
pressing this soft button will start the assembly of a diagnostics file.
The file will be presented in XML format for download.
If you experience unexpected behavior of the device you may be asked by
the Junger service team to send such file by e-mail for analysis.
19
via web browser
–
Advertisement
Table of Contents
