Table of Contents
Advertisement
T*AP
When you press the soft button this window shows up on the PC screen :
The process must be enabled
in order to get the correct display. You can do it either from the T*AP
GUI or from here. When starting this application the settings will be read from the T*AP and will be used
and displayed here. Pay attention that Max Gain is not set to 0dB.
If you change settings you must store them in the T*AP by first selecting a preset number and pressing
the <save> button in the ON AIR section of the Spectral Signature pane afterwards.
See separate manual for J*AM for more details.
41
Advertisement
Table of Contents
