Contrast - ersa i-CON 1V Operating Instructions Manual

Functional description
6.5

Contrast

Please proceed as follows to adapt the display contrast to your working environment:
■
Set the desired contrast by turning i-OP.
■
Confirm your input by pressing i-OP.
Also the connected tool will appear in the display.
The contrast menu also displays the software version and date as well as the hardware
version of the Control board (CB). Activate contrast mode as described above, then click
and hold i-OP. Clicking and holding i-OP for a second time closes the display.
Ersa i-CON 1V & i-CON 2V
1
3BA00231 · 2019-03-12 · Rev. 4
■
Switch on the station and rotate i-OP immediately.
This activates the contrast mode:
2
0
0,5 s
2s
3
95