Setting The Password - ersa i-CON 1V Operating Instructions Manual

Functional description
6.3.13.1

Setting the password

Ersa i-CON 1V & i-CON 2V
You should always remember the password you have chosen, or keep it in
a safe place. A forgotten password can only be deactivated by Ersa. If you
have an i-SET TOOL with saved factory settings, you can also unlock the
station yourself.
Please proceed as follows to activate the function [Pass-
word]:
■
Open the configuration mode and choose the option
[Edit].
■
Enable the [Password] function by turning i-OP.
■
Press i-OP to activate the cursor; pressing i-OP again
deactivates the cursor.
With the cursor activated, the parameter value can be changed accord-
ingly by turning the i-OP.
■
To enter the desired password (numerical value
between [0001] and [9999]) by turning the i-OP: Turn
clockwise to increase, turn counter-clockwise to
reduce.
■
Confirm the password by pressing i-OP. The first dis-
play [Password activation] will appear:
To cancel the process, you can either
■
choose [ABORT] and confirm ( In this case there is no
password protection).
or
■
write down the set password, select [>>>] (Continue)
and press i-OP to confirm.
3BA00231 · 2019-03-12 · Rev. 4
89