Intended Use; National And International Regulations - ersa i-CON 1V Operating Instructions Manual

Concerning your safety
3.3

Intended use

Thermal tools from Ersa must only be used for the processing of soft solder. However,
if explicitly described in the operating instructions of the respective thermal tool, some
thermal tools may, in exceptional cases, be used for the processing of plastic materials. In
case of unintended use and tampering with the device, any warranty and liability claims
of the buyer against the manufacturer will become null and void. Intended use also
includes observing the operating instructions including the safety instructions.
3.4

National and international regulations

National and international health and safety regulations as well as occupational health
and accident prevention regulations must be complied with.
Ersa i-CON 1V & i-CON 2V
3BA00231 · 2019-03-12 · Rev. 4
71