Transport, Storage, Waste Disposal - ersa i-CON 1V Operating Instructions Manual

Transport, storage, waste disposal

4. Transport, storage, waste disposal
The soldering station is delivered in a sturdy cardboard box. Please use only the original
packaging for transportation and intermediate storage. Strictly avoid jerkily moving,
impacting or dropping the soldering station. The soldering station must be protected
from weather influences such as rain, fog or sea air, etc. During extended storage in high
humidity areas, the soldering station must be hermetically packed and provided with
a dehumidifying agent. Damage caused by unprofessional transport or storage are not
covered under warranty.
72
Disposal instructions according to Directive 2002/96/EC of the European
Parliament and of the Council of 27 January 2003 on waste electrical and
electronic equipment:
Products marked with a crossed out waste bin must not be disposed of
together with unsorted domestic waste. Municipalities have special col-
lection points for this type of waste. Please consult your council and ask
for available possibilities for the separated collection of old appliances.
You thereby contribute to the reuse or other forms of use of old appli-
ances, with the aim of protecting the environment and human health.
3BA00231 · 2019-03-12 · Rev. 4 Ersa i-CON 1V & i-CON 2V