Forgotten Password; Temperature Unit; Language Selection; Adjustable Shutdown Function (Idle State) - ersa i-CON 1V Operating Instructions Manual

Hide thumbs Also See for i-CON 1V:

Table of Contents

Functional description

6.3.13.4

Forgotten password

If you have forgotten your password, this can only be reactivated by Ersa Service due to

safety reasons. In this case please consult Ersa by stating your address, name, invoice

number and serial number of the soldering station (see type plate). Password protection

can also be revoked via the i-SET TOOL. For this purpose, follow the corresponding note

in section 6.3.13 [Password protection]!

6.3.14

6.3.15

6.3.16

The adjustable shutdown function (Idle state) serves the purpose of energy saving and

extending the soldering tip and heating element service lives. In idle state, the tools cool

down to room temperature. The bottom line in the display then shows the text [Idle

state]. You can end idle state at any time by actuating i-OP.

Please proceed as follows to activate the function [Idle state]:

Ersa i-CON 1V & i-CON 2V

Here you can choose the desired temperature units De-

gree Celsius (°C) or Fahrenheit (°F). Factory setting: "°C"

Here you can choose the desired language for the solder-

ing station menu prompts. Factory setting: "English"

■

Open the configuration mode and choose the option

[Idle state].

■

Activate the menu [Idle state] by turning i-OP.

3BA00231 · 2019-03-12 · Rev. 4

Table of Contents

Show Quick Links

Table of Contents