Working With Three Fixed Temperatures (Target Temperatures) - ersa i-CON 1V Operating Instructions Manual

Functional description
T
(°C)
320
270
220
170
120
70
20
6.2.5

Working with three fixed temperatures (target temperatures)

With this function, you can save three fixed temperature in the soldering station. If nec-
essary, you can quickly and easily retrieve these temperatures. To learn how to enable
this feature please see the [Configuration mode] section. To learn how to set tempera-
tures, please read the [Parameter mode] section. After completing these two steps, you
can switch between the set fixed temperatures.
80
• Horizontal (x): set heating level
• Vertical (T): Temperature after 10 minutes heating time
1 2 3 4
The currently set temperature will be displayed with a bright background.
As soon as the set temperature has been reached, [OK] will be displayed
in the lower area of the screen.
3BA00231 · 2019-03-12 · Rev. 4
5 6 x
■
In the working mode, two temperature values will
then appear in the left half of the display.
■
Select the desired temperature by turning the i-OP.
Ersa i-CON 1V & i-CON 2V