Inserting A Microsd Card - ersa i-CON 1V Operating Instructions Manual

Commissioning
5.2.1.1

Inserting a microSD card

The station is provided with a port for a microSD card.
76
■
Insert the microSD card into the port as
shown.
■
You should recognize a slight resistance after
inserting half the card. This is a sign that the
card is inserted correctly.
■
If there is no tangible resistance take the card
out completely and try again.
■
A firmware update is started automatically
as soon as the card is inserted correctly. For
carrying out any other application follow the
menu navigation.
■
The firmware and the update instructions can
be found at www.kurtzersa.com, in section
i-CON 1V oder i-CON 2V under "Downloads".
3BA00231 · 2019-03-12 · Rev. 4 Ersa i-CON 1V & i-CON 2V