ersa i-CON 1V Operating Instructions Manual page 11

Concerning your safety
Ersa i-CON 1V & i-CON 2V
ATTENTION Eating and drinking prohibited!
Solders and solder auxiliaries are toxic. If they enter into the organism it
will have a toxic effect. Eating, drinking and smoking is strictly prohibited.
Always wash your hands thoroughly after having worked with solder and
solder auxiliaries.
CAUTION! Danger of poisoning by inhalation!
Harmful fumes are produced during soldering. Ensure sufficient venti-
lation or extraction. Follow the relevant safety data sheets of the used
solder paste and flux.
CAUTION Dangerous electrical voltage!
!
Protect the supply cables. Do not use the connecting cable to pull out
the mains plug or carry the device. Keep connecting cables clear of heat,
oil or sharp edges. Damaged connecting cables may cause fires, short
circuits or electric shocks and must therefore be immediately replaced.
ATTENTION! Fire hazard and dangerous electrical voltage!
Consider environmental influences. Protect your device against any type
of fluid and moisture. Otherwise there is a danger of fire or electric shock.
CAUTION! Risk of injury!
Take care of your thermal tool. Always keep your Ersa product in a safe
and dry place, out of the reach of children. Follow the maintenance
instructions. Check your device in regular intervals. Use only original
accessories and spare parts from Ersa.
ATTENTION Risk of injury!
Physically and/or mentally disabled persons must only use the soldering
station under the supervision of trained specialists! Children are not
allowed to play with the soldering devices.
3BA00231 · 2019-03-12 · Rev. 4
69