Factory Settings ("Default") - ersa i-CON 1V Operating Instructions Manual

Functional description
6.4

Factory settings ("Default")

The following list shows the settings with which the station has been programmed in the
factory. These settings can be restored via the "Default function" in configuration mode.
The only exception is the password setting which is not deleted via the default function.
Configuration mode
Parameter
↑ Temperature window, °C (0 °C to 150 °C)
↓ Temperature window, °C (0 °C to 150 °C)
Idle state
Heating plate
Process alarm
Password
Unit
Language
Parameter mode
Parameter
Target temp. °C
Calibr. temp. °C
Tip offset/type
Energy
Standby time (min)
Standby temp. (°C)
94
i-TOOL TECH TOOL
(X-TOOL)°
360 360
0 0
– 1 (2)°
Medium Medium
(High)°
5 10
250 230
3BA00231 · 2019-03-12 · Rev. 4
Setting
20
20
000
0
Off
0000 (not deleted via the default function!)
°C
EN
CHIP TOOL CHIP TOOL
VARIO
385 360
0 0/0
422 MD 462MD007
- Medium
10 5
280 250
MICRO X-TOOL POWER
TOOL VARIO TOOL
285 360 360
0 0 0
1 04 1
- Medium Medium
10 5 10
280 250 230
Ersa i-CON 1V & i-CON 2V