Microsd Card - ersa i-CON 1V Operating Instructions Manual

Commissioning
5.2.1

microSD card

The use of a microSD card allows you to make firmware updates. The latest firmware can
be found on the web pages of "www.kurtzersa.com". Log in to the free Members Area
and open section "6.1.4 i-CON family".
Ersa i-CON 1V & i-CON 2V
■
Check the correct fit of the soldering tip.
■
Ensure the correct fit of the plug in the connection
socket. The pin in the plug must match the groove in
the connection socket.
■
Connect the soldering tool with the station. To do so,
insert the plug into the socket and lock it. Store the
soldering tool in the workstand.
■
Connect the mains supply cable with the soldering
station via the mains socket
➊ Interface (C models)
■
Switch on the soldering station.
ON
CAUTION! Risk of burning!
The connected soldering tools are immediately heated after they are
switched on!
3BA00231 · 2019-03-12 · Rev. 4
75