Temperature Window; Process Alarm; Password Protection - ersa i-CON 1V Operating Instructions Manual

Functional description
6.3.11

Temperature window

6.3.12

Process alarm

6.3.13

Password protection

88
• Enabling fixed temperatures
• Language selection for the station
With active password protection you cannot reset the soldering station
to the "as delivered" state (default) without entering your password.
For the connected soldering tool, a temperature window
with an upper and lower range can be defined. If the
current tool temperature is within this window, "OK" will
appear in the working mode.
Factory setting:
When the current tool temperature disappears from the
temperature window, a single audible signal will sound.
When the current tool temperature is displayed again
in the temperature window, a double audible signal will
sound. Factory setting: [off].
The data of the station can be protected by a 4-digit
(0001-9999) password. This ensures that no settings/
changes are made. No password protection is enabled at
the factory. This is indicated with [0000] in the password
input window.
The akey symbol signals that the station is protected.
Factory setting: [0000] = no protection.
3BA00231 · 2019-03-12 · Rev. 4
↑
20 °C (68 °F)
↓
20 °C (68 °F)
Ersa i-CON 1V & i-CON 2V