When Radio Station/Gps Mounted On The Boat - HONDA marine BF200A Set-Up, Installation, And Pre-Delivery Service

Hide thumbs Also See for BF200A:
Table of Contents

Advertisement

WHEN RADIO STATION/GPS MOUNTED
ON THE BOAT
The ECM and its wires are designed so that they are not
affected by the external jamming, but the ECM can function
erroneously when
it
receives the extremely strong electric
wave. Check the ECM for erroneous operation whenever a
radio station or a navigation system is mounted on the bort.
Observe the following instructions to prevent erroneous
operation.
Set the antenna and the radio station at least
50
cm (1.6
ft)
or more away from the ECM, switch panel wire harness,
indicator wire harness, switch panel or remote control
box and the indicator panel.
Avoid routing the antenna wire lead too long compared
t o the remote control wire leads.
Do not install the radio station that does not conform
with the laws and regulations concerned
(IOW
or below).
(Installation
example)
\
Set the GPS antenna and navigation unit at least 3 m (4.8
Ground the GPS antenna ground securely.
ft) or more away from the ECM.
CAUTION:
After installing a radio station or GPS, the ECM must
be inspected for erroneous operation.
RADIO
REMOTE CONTROL BOX
I
ANTENNA
~
-D
Keep away
at .-'ast
50cm (1.6ft).
1
I
A
-
-
SWITCH PANEL
AND/OR
INDICATOR PANEL
RADIO STATION
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bf175aBf225a

Table of Contents