Table of Contents
Advertisement
TOP MOUNT REMOTE CONTROL
This section shows you the right-hand handle type only. The right-hand remote control is designed so that you can perform
the throttle operation and the tilt angle adjustment with your right hand. Note that the name and operation of each part of
the left-hand handle type are identical with those of the right-hand handle type.
CONTROL LEVER
POWER TRIM/TILT
SWITCH
GEARSHIFT/THROTTLE
CONTROL LEVER
POWER TRIM/TILT
POWER TRIM/TILT
SWITCH (LEFT)
FAST IDLE BUlTON
The first idle button is only needed for starting carbureted outboard models. The BF200A and BF225A models use
programmed fuel injection so, this lever will not be needed for starting.
After the engine starts and if the outside temperature is below 41°F (5"C), the fast idle lever can be used to accelerate
engine warm up.
35"
N (Neutral)
35"
The illustration shows the remote control
lever operation when the right-hand handle
type remote control is mounted o n the right
side. Left-hand handle type remote control
operation mounted o n the left side is the
mirror image of the above illustration.
I
MAXIMUM
17
Hide quick links:
Advertisement
Table of Contents
