HONDA marine BF200A Set-Up, Installation, And Pre-Delivery Service page 27

14. Use the guide plate (provided with the kit) and install
the cover and the housing lead. Follow the instructions
on the guide plate carefully.
/
COVER
I'
I
HOUSING LEAD
GUIDE PLATE
Spacer Installation (Optional equipment)
Install the spacer, i f necessary, between the control
cushion and the mounting surface as shown, and secure
with the 5
x
65 mm screws, 5 rnrn washers and 5 rnrn nuts
(provided with the spacer).
MOUNTING SURFACE
5 mm WASHER
26