Table of Contents
Advertisement
14. Make sure that the shift link moves smoothly and
returns to the neutral detent position when the remote
control lever is returned to the neutral.
CAUTION:
If it is hard to shift, turn propeller shaft. Shifting with
force will damage the shift mechanism.
If shift arm moves smoothly and neutral detent aligns,
tighten the cable lock nut securely.
If the shift position is not in neutral position when the
shift lever moves from forward position to neutral
position, loosen the lock nut of the shift pivot and
turn the shift pivot close to mark (A).
After adjusting, tighten the lock nut.
ADJUSTABLE
RANGE
If
the shift position is not in neutral position when the
shift lever moves from reverse position to neutral
position, loosen the lock nut of the shift pivot and
turn the shift pivot close to mark (B).
After adjusting, tighten the lock nut.
h
ADJUSTABLE RANGE
MARKC
MARK B
Throttle Cable Connection
1. Apply marine grease to the joint hole of the shift pivot
and throttle arm link.
2.
Adjust the shift pivot until it will attach to the throttle
arm link.
3. Install the shift pivot to the throttle arm link, then
tighten the lock nut securely.
&
(Marine grease)
I
SHIFT PIVOT
THROTTLE ARM
4.
Move the remote control lever to the full throttle position.
5.
Make sure that the throttle arm contacts the throttle
arm stopper. Adjust by turning the shift pivot if necessary.
6. After adjustment, recheck and tighten the lock nut.
THROTTLE
Pzr=
ARM
LOCK NUT
31
Hide quick links:
Advertisement
Table of Contents
