Outputs For Signalling - ABB RELION 615 Series Applications Manual

1MRS758272 B
5.2.2
REG615
Application Manual
Table 39: Output contacts
Terminal
X100:6
X100:7
X100:8
X100:9
X100:15
X100:16
X100:17
X100:18
X100:19
X100:20
X100:21
X100:22
X100:23
X100:24

Outputs for signalling

SO output contacts can be used for signalling on start and tripping of the protection
relay. On delivery from the factory, the start and alarm signals from all the protection
stages are routed to signalling outputs.
Table 40: Output contacts X100:10-14
Terminal
X100:10
X100:11
X100:12
X100:13
X100:14
Output contacts of slot X110 are optional for configurations A, C and D.
Table 41: Output contacts X110:14-24 with BIO0005
Terminal
X110:14
X110:15
X110:16
X110:17
X110:18
X110:19
Table continues on next page
Protection relay's physical connections
Description
PO1, NO
PO1, NO
PO2, NO
PO2, NO
PO3, NO (TCS resistor)
PO3, NO
PO3, NO
PO3 (TCS1 input), NO
PO3 (TCS1 input), NO
PO4, NO (TCS resistor)
PO4, NO
PO4, NO
PO4 (TCS2 input), NO
PO4 (TCS2 input), NO
Description
SO1, common
SO1, NC
SO1, NO
SO2, NO
SO2, NO
Description
SO1, common
SO1, NO
SO1, NC
SO2, common
SO2, NO
SO2, NC
Section 5
141