Outputs For Signalling - ABB RELION 615 Series Applications Manual

1MAC807603-MB A
5.2.2
RED615 ANSI
Application Manual
Table 32: Output contacts
Terminal
X100:6
X100:7
X100:8
X100:9
X100:15
X100:16
X100:17
X100:18
X100:19
X100:20
X100:21
X100:22
X100:23
X100:24

Outputs for signalling

SO output contacts can be used for signalling on pickup and tripping of the protection
relay. On delivery from the factory, the pickup and alarm signals from all the protection
stages are routed to signalling outputs.
Table 33: Output contacts X100:10-14
Terminal
X100:10
X100:11
X100:12
X100:13
X100:14
Output contacts of slot X110 are optional.
Table 34: Output contacts X110:14-24 with BIO0005
Terminal
X110:14
X110:15
X110:16
Table continues on next page
Protection relay's physical connections
Description
PO1, NO
PO1, NO
PO2, NO
PO2, NO
PO3, NO (TCM resistor)
PO3, NO
PO3, NO
PO3 (TCM1 input), NO
PO3 (TCM1 input), NO
PO4, NO (TCM resistor)
PO4, NO
PO4, NO
PO4 (TCM2 input), NO
PO4 (TCM2 input), NO
Description
SO1, common
SO1, NC
SO1, NO
SO2, NO
SO2, NO
Description
SO1, common
SO1, NO
SO1, NC
Section 5
103