Danfoss VLT Micro Drive FC 51 Series Programming Manual page 48

VLT Micro Drive FC 51
[2] LogicAnd
* LogicOr
[3]
8-56 Preset Reference Select
Option:
[0] Digital Input
[1] Bus
[2] LogicAnd
LogicOr
*
[3]
4.9.6. 8-9* Bus Feedback
Parameter for configuring bus feedback.
8-94 Bus Feedback 1
Range:
*
0 [0x8000 - 0x7FFF]
Activation via serial communication port and a digital input.
Activation via serial communication port or a digital input.
Function:
Select control of Preset Reference selection via digital input and/or bus.
Activation via a digital input.
Activation via serial communication port.
Activation via serial communication port and a digital input.
Activation via serial communication port or a digital input.
Function:
Bus feedback is delivered via FC or Modbus by writing the feedback value into this parameter.
MG.02.C4.02 - VLT is a registered Danfoss trademark
4. Parameter Descriptions
47
4