Danfoss VLT Micro Drive FC 51 Series Programming Manual page 59

4. Parameter Descriptions
4.12.4. 15-3* Fault Log
This parameter group contains a fault log showing reasons for the ten latest trips.
15-30 Fault Log: Error Code
Range:
0 [0 - 255]
4.12.5. Drive Identification, 15-4*
Parameters containing read only information about the hardware and software configuration of the frequency converter.
4
15-40 FC Type
Option:
15-41 Power Section
Option:
15-42 Voltage
Option:
15-43 Software Version
Option:
15-46 Frequency Converter Ordering No
Option:
15-48 LCP ID No
Option:
15-51 Frequency Converter Serial Number
Option:
58
Function:
View error code and look it up in VLT Micro Operating Instructions.
Function:
View FC type.
Function:
View power section of frequency converter.
Function:
View voltage of frequency converter.
Function:
View software version of frequency converter.
Function:
View ordering number for re-ordering frequency converter in its original configuration.
Function:
View LCP ID number.
Function:
View frequency converter serial number.
MG.02.C4.02 - VLT is a registered Danfoss trademark
VLT Micro Drive FC 51